PRODUCTS

The bearing housing is lined with high molecular material, which has good wear resistance. No lubricant needs to be added. Only the inner lining needs to be replaced, saving costs

The inner lining is made of polymer material, with good wear resistance, self-lubricating without adding lubricant, only the inner
lining can be replaced, saving costs

Description

scraper plastic drag chain 152.4mm/66.26mm pitch for sludge scraper parts details

What are the components of the non-metal chain plate scraper
1. Helical gear reducer (SEW\NORD\Guomao)
2. NER-720-S (6 inch pitch) chain
3. Glass fiber scraper (standard, high-strength, super-strength three)
4. Wear-resistant boots for upper and lower sides

5.NER-720-S traction sprocket
6. NER-NH-78 drive sprocket and driving sprocket
7. High strength stainless steel spindle
8. Cast nylon high strength short shaft
9. Short shaft combination of idle and drive cast nylon
10. Replaceable adjustable balance self-lubricating bearing seat
11. FRP rail and nylon 6 rail bracket
12. High molecular polyethylene (UHMW-PE) track and ground wear strip

scraper plastic drag chain 152.4mm/66.26mm pitch for sludge scraper parts manufacture

Features of non-metal chain plate scraper;
1. Good installation quality, easy maintenance and long service life.
2. Energy saving, plastic parts are easy to move, and power consumption is small, generally less than 0.25-0.55KW.
3. The idler (guide wheel) is adjustable for calibration. The length between the chains can also be adjusted according to the chain pitch.
4. The plastic bottom rail scraper can prevent derailment, and general small problems can be adjusted.
5. Low energy consumption and low operating cost.

scraper plastic drag chain 152.4mm/66.26mm pitch for sludge scraper parts supplier

Non-metallic chain plate type mud scraper and its accessories

Serial number	Name	Specification	Product description
NER-KE8001	11 tooth drive sprocket	Pitch 66.26mm	Built-in safety bolt, split structure, to protect the equipment from major damage when it fails, an alarm device can be added, and only the sprocket part needs to be replaced when replacing
NER-KE8002	drive chain	Pitch 66.26mm	The new pin-wearing method improves the problems of the original cotter pin, which has a large width, is easy to hang dirt, andtakes a long time to rotate and the embossing pin falls off.
NER-KE8003	40 tooth driving sprocket	Pitch 66.26mm	Split two-lobe structure, easy to install, the sprocket body and ring gear are assembled separately, and only the ring gear can be replaced for later maintenance, saving costs
NER-KE8004	Bearing housing		The inner lining is made of polymer material, with good wear resistance, self-lubricating without adding lubricant, only the inner lining can be replaced, saving costs
NER-KE8005	23 tooth driven sprocket	Pitch 152.4mm	Split sprocket has the lowest wear, easy to install, sprocket with protective rim to ensure smooth running of the sprocket, cast nylon 6 for better wear resistance
NER-KE8006	traction chain	Pitch 152.4mm	The product has good wear resistance and is composed of 3 parts. It is easy to install and does not require any tools. The breaking force is greater than 3T. Stainless steel wear-resistant sleeves can be added.
NER-KE8007	FRP scraper		Material FRP, the scraper is divided into two types: standard type and reinforced type, with high strength, good corrosion resistance of curved type, and two widths of 178 and 138
NER-KE8008	Scraper pads		Corrosion resistance, increase the screw locking force, and ensure the stable connection of the scraper
NER-KE8009	Scraper Connector		The product has good wear resistance, high strength, and has reinforcing ribs to ensure stable connection
NER-KE80010	upper and lower wear boots		Nylon 6 material, each with two interchangeable working surfaces, one side can be replaced when worn, and the upper wear-resistant shoe has baffles to prevent the scraper from tilting
NER-KE80011	Stainless Steel Spindle		Material stainless steel 304, high strength
NER-KE80012	guide		Material FRP, corrosion resistant and lighter
NER-KE80013	Rail bracket		Made of nylon 6, corrosion-resistant, lightweight
NER-KE80014	up and down rails		Made of ultra-high molecular weight polyethylene, with good self-lubricating wear resistance and corrosion resistance
NER-KE80015	Rail washer		Material 304 stainless steel
NER-KE80016	short axis		Made of cast nylon 6, more corrosion resistant and lighter
NER-KE80017	Bushing		Made of UHMW-PE, more wear-resistant, better self-lubricating, has been replaced to reduce costs
NER-KE80018	17 tooth guide sprocket	Pitch 152.4mm	Split sprockets have the lowest wear and are easy to install, sprockets with protective rims ensure smooth chain operation, cast nylon 6 for better wear resistance
NER-KE80019	23 tooth drive sprocket		Pitch 66.26mm reinforced nylon material is suitable for small pools within L20 meters
NER-KE80020	Scraper bushing block		Suitable for 138 width scraper
NER-KE80021	big link		Pitch 152.4, self-locking
NER-KE80022	FRP scraper		imported resin Lightweight FRP Matching rubber strips, abrasion resistant boots
NER-KE80023	23 tooth sprocket	Pitch 152.4mm
NER-KE80024	17 tooth sprocket	Pitch 152.4mm
NER-KE80025	11 tooth reducer sprocket	Pitch 66.26mm	For replacement and maintenance
NER-KE80026	Tensioner sprocket		Drive chain tension
NER-KE80027	long wear boots		Wear-resistant nylon length 180mm
NER-KE80028	scraper connector small chain	Pitch 66.26mm	Slag skimmer for small mud scraper
NER-KE80029	Various nylon ring gears	Pitch 66.26mm	Replacement and maintenance use
NER-KE80030	Stainless Steel Chain Wear-resistant Protective Cover		Trial drive chain 66.26mm and traction chain 152.4mm pitch

scraper plastic drag chain 152.4mm/66.26mm pitch for sludge scraper parts factory

The factory has multiple automatic injection molding machines, so don't worry about large quantities.

If you need custom ones, please let me know the length/height/width of your pool.

Hengshui huake rubber & plastic co.,LTD.Is a comprehensive enterprise that introducesforeign advanced technology, integrates development,design, manufacturing and processing. The company is committed to the r&d and production of high performance products of newrubber and plastic materials supporting equipment in the new energy photovoltaic andenvironmental protection water treatment industry. The company has passed iso9001-2008product quality certification and registered brand "NER" in the spirit of improving productquality and building a first-class brand，providing high-quality products and the mosthumanized services for customers. Focus on the research and development of application technology in synthetic rubber industry. The factory has established a set of rubber vulcanization curve control system and introduced the production and testing equipment of rubber products. Under the complex and rigorous control mechanism and the application of advanced production, management and testing technology, it has achieved the consistency of all product processes, that is, product design, formula development, raw material mixing, mold processing, inspection, performance test, manufacturing, etc. The organic combination of rubber product manufacturing and rubber raw material formula development has laid a solid foundation for the company in innovative design and market development. It has obtained a number of patent certificates in terms of new structure sealing ring and product production process. The company takes innovative technology and meeting user needs as its business philosophy, makes every effort to build ner brand, and provides reasonable and advanced solutions for many supporting manufacturers of industrial enterprises. This relationship ensures the high-quality products of the original design manufacturer (ODM) and contributes to the company's technical background for future development planning. This cooperation enables the original manufacturer (ODM) and the company to obtain continuous competitive advantages. Today, NER has become a rubber component supplier with certain competitive advantages in the global rubber market. Its products are mainly used in fluid sealing equipment in sewage treatment, automobile, aviation, machinery, petrochemical, medical treatment, food, electronics, national defense, military and other industries.